Safedeck

Pools are a constant source of fun and enjoyment for all members of the family. Enjoy your pool and peace of mind with the new Safedeck safety cover. Designed to offer protection against unauthorised access to the pool, it also reduces heat loss, slows chemical burn-off and helps minimise dirt and debris ingress. Engineered from high quality extruded aluminium and reinforced PVC, Safedeck covers are easy to fit and easy to operate.

Safedeck Cover Material

Standard Safedeck covers are made of reinforced PVC material for extra strength and are available in four colours; water blue, leaf green, blue and solar. The new Safedeck Plus uses a lighter, open weave, PVC coated, Polyester fabric, making it lighter and easier to operate. Triangular section aluminium profiles give easy rolling and extra stiffness and are fitted with plastic end caps to reduce scuffing. Both materials help to reduce heat loss through evaporation, as well as reducing the need for dehumidity equipment on indoor pools. The solar material can also provide additional pool heating from infra-red light, even on dull days.

New Safedeck Plus

The Safedeck Plus uses a lighter, open weave, PVC coated, Polyesther fabric, making it lighter and easier to operate.

Safedeck Safe-Easy

Using a 24V rechargeable battery, the Safe-Easy allows effortless rolling up of the cover. The aluminium casing is reinforced with stainless steel to encapsulate the motor and protect against the elements whilst the built-in support wheels mean it is light to operate and easy to store. Suitable for covers up to 12.4 x 5.4m, or can be ordered with an extra battery for covers up to 6.6m wide

Operation

The cover is fitted permanently to the pool surround at one end of the pool. To unroll the cover (cover the pool) the operator uses the fitted pull strap. The aluminium profiles rest on the coping stones, overlapping by a minimum of 200mm on each side. Once the pool is covered, the operator fits the straps to the drop down anchors, and operates the built-in locking bar to stretch and secure the cover. To uncover the pool, rolling up is done by using either the Safe-Easy cranking handle.

Additions

If snow is likely to settle on the cover, extra reinforcing can be installed at the time of manufacture to support a load of up to 150mm of snow. For pools with a roman end on the side, an aluminium bridging beam can be provided to support the cover.